Welcome to AiroPeek NX!


1. To install AiroPeek NX, run the SETUP.EXE program in the
   AiroPeek NX directory. If you have problems running the
   setup program, try copying the files to your hard disk
   and running it from there.

2. To install iNetTools, run the SETUP.EXE program in the
   iNetTools directory.  If iNetTools asks you for a serial
   number, use your AiroPeek NX serial number.

3. iNetTools integration with AiroPeek NX is available from
   both installers, so it doesn't matter which setup program
   you run first.

4. Once AiroPeek NX is installed, the 1033\Documents subdirectory 
   will contain the AiroPeek NX Manual, the RFGrabber Probe manual,
   and the Peek SDK folder.  For more details on the Peek SDK, 
   see the Readme.html in the Peek SDK folder. All documents with 
   the ".pdf" extension are for use with Adobe Acrobat Reader(tm).


For technical support, please visit our web site
at http://www.wildpackets.com/support/contact/

WildPackets, Inc.
http://www.wildpackets.com

Copyright (C) 2001-2003. WildPackets, Inc.
All rights reserved.